Núcleos polvo de hierro
Los espacios de aire dentro del núcleo hacen que el valor de corriente que fluye a través de la bobina sea mucho más alto que en el caso de los núcleos de ferrita y no provocan una saturación magnética rápida. Los núcleos de polvo se caracterizan por una capacidad excepcional para almacenar energía. Además, no emiten ruidos ni perturbaciones acústicas que pueden ocurrir en los componentes donde se aplicaron los núcleos de ferrita con huecos.
Los núcleos están hechos de varios materiales en polvo de hierro. Cada material tiene un código único con diferentes colores de recubrimiento, que identifica fácilmente el magnetismo. Los diversos materiales difieren en permeabilidad, rango de frecuencia, curva de magnetización, pérdida de potencia, etc. Debido a sus propiedades, los núcleos de polvo de hierro son materiales magnéticos relativamente económicos para la producción de varios choques en sistemas de potencia y EMI.
Los componentes típicos fabricados a base de núcleos de polvo de hierro se utilizan en reactancias de salida de CC, reactancias PFC y bobinas para eliminar el método diferencial de interferencia.
La desventaja son las grandes pérdidas de potencia generadas en los núcleos de hierro, por lo que no se utilizan con tanta frecuencia en los transformadores de pulsos.
Los núcleos de polvo de hierro se producen principalmente como núcleos toroidales, pero también están disponibles en forma de E, U y núcleos cilíndricos.
Comparativa materiales
| CARACTERISTICAS MATERIAL |
COMPARATIVA DE PERDIDAS (mW/cm³)
|
|||||||||||
| NOMBRE MATERIAL | Permeabilidad µe | Temp. Coefic. de Perm. (+ppm/ºC) | Coef. Expansion (+ppm/ºC) | Color | 60Hz 5000Gs | 1KhZ 1500Gs | 10KhZ 500Gs | 50KhZ 225Gs | 100KhZ 140Gs | 500KhZ 50Gs |
Permeabilidad con DC Bias
|
|
| % µe | µ effective | |||||||||||
| -2 | 10 | 100 | 10 | Red/clear | – | – | – | 28 | 19 | 12 | 100 | 10.0 |
| -8 | 35 | 285 | 10 | yellow/red | 45 | 64 | 59 | 50 | 35 | 28 | 91 | 31.9 |
| -14 | 14 | 155 | 10 | Black/Red | – | – | – | 29 | 21 | 17 | 100 | 14.0 |
| -18 | 55 | 385 | 11 | Green/Red | 48 | 72 | 70 | 63 | 46 | 37 | 74 | 40.7 |
| -19 | 55 | 650 | 11 | Red/Green | 31 | 60 | 72 | 71 | 54 | 49 | 74 | 40.7 |
| -26 | 75 | 825 | 12 | Yellow/White | 32 | 60 | 75 | 89 | 83 | 139 | 51 | 38.3 |
| -28 | 22 | 510 | 11 | Gray/Green | 38 | 80 | 120 | 164 | 158 | 247 | 91 | 20.0 |
| -30 | 22 | 510 | 11 | Green/Gray | 37 | 80 | 120 | 149 | 129 | 129 | 91 | 20.0 |
| -33 | 33 | 665 | 11 | Gray/Yellow | 37 | 80 | 126 | 182 | 180 | 291 | 84 | 27.7 |
| -34 | 33 | 565 | 11 | Gray/Blue | 29 | 61 | 87 | 100 | 82 | 78 | 84 | 27.7 |
| -35 | 33 | 665 | 11 | Yellow/Gray | 33 | 73 | 109 | 137 | 119 | 123 | 84 | 27.7 |
| -38 | 85 | 955 | 12 | Gray/Black | 31 | 57 | 72 | 99 | 103 | 217 | 51 | 43.4 |
| -40 | 60 | 950 | 11 | Green/Yellow | 29 | 62 | 93 | 130 | 127 | 223 | 62 | 37.7 |
| -45 | 100 | 1045 | 12 | Black/Black | 26 | 49 | 60 | 69 | 61 | 92 | 46 | 46.0 |
| -52 | 75 | 650 | 12 | Green/Blue | 30 | 56 | 68 | 72 | 58 | 63 | 59 | 44.3 |
Núcleos Polvo de hierro (Iron Powder cores)
| AL | OD | ID | Ht | le | Ae | V | ||
| Part No. | nH/N² | in/mm | in/mm | in/mm | cm | cm² | cm³ | |
| KT14-26A | 12.5 | .135/3.43 | .67/1.70 | .60/1.52 | .810 | .012 | .0098 | – |
| KT14-45A | 16.5 | – | ||||||
| KT14-52A | 11.5 | – | ||||||
| KT16-2 | 2.2 | .160/4.06 | .078/1.98 | .060/1.52 | .930 | .015 | .014 | – |
| KT16-8 | 6.0 | – | ||||||
| KT16-18 | 9.5 | – | ||||||
| KT16-26 | 14.5 | – | ||||||
| KT16-40 | 12.5 | – | ||||||
| KT16-45 | 17.0 | – | ||||||
| KT16-52 | 13.5 | – | ||||||
| KT20-2 | 2.5 | .200/5.08 | .088/2.24 | .070/1.78 | 1.15 | .023 | .026 | – |
| KT20-8 | 7.8 | – | ||||||
| KT20-18 | 13.0 | – | ||||||
| KT20-26 | 18.5 | |||||||
| KT20-40 | 16.0 | – | ||||||
| KT20-45 | 22.5 | – | ||||||
| KT20-52 | 17.5 | |||||||
| KT22-26 | 38.5 | .223/5.66 | .097/2.46 | .143/3.63 | 1.28 | .052 | .067 | – |
| KT22-52 | 38.5 | – | ||||||
| KT25-2 | 3.4 | .225/6.48 | .120/3.05 | .096/2.44 | 1.50 | .037 | .055 | – |
| KT25-8 | 10.0 | – | ||||||
| KT25-18 | 17.0 | – | ||||||
| KT25-26 | 24.5 | |||||||
| KT25-40 | 20.5 | – | ||||||
| KT25-45 | 31.0 | – | ||||||
| KT25-52 | 23.0 | |||||||
| KT26-8 | 24.0 | .265/6.73 | .105/2.67 | .190/4.83 | 1.47 | .090 | .133 | – |
| KT26-18 | 41.5 | – | ||||||
| KT26-26 | 57.0 | |||||||
| KT26-45 | 77.0 | – | ||||||
| KT26-52 | 56.0 | – | ||||||
| KT27-2 | 3.3 | .280/7.11 | .151/3.84 | .128/3.25 | 1.71 | .047 | .080 | – |
| KT27-8 | 11.5 | – | ||||||
| KT27-18 | 18.5 | – | ||||||
| KT27-26 | 27.5 | – | ||||||
| KT27-52 | 25.5 | – | ||||||
| KT30-2 | 4.3 | .307/7.80 | .151/3.84 | .128/3.25 | 1.84 | .060 | .110 | – |
| KT30-8 | 14.0 | – | ||||||
| KT30-18 | 22.0 | – | ||||||
| KT30-26 | 33.5 | – | ||||||
| KT30-40 | 28.0 | – | ||||||
| KT30-45 | 40.5 | – | ||||||
| KT30-52 | 30.5 | – | ||||||
| KT32-52 | 35.0 | .327/8.31 | .169/4.29 | .158/4.01 | 1.96 | .073 | .144 | – |
| KT37-2 | 4.0 | .375/9.53 | .205/5.21 | .128/3.25 | 2.31 | .064 | .147 | – |
| KT37-6 | 3.0 | |||||||
| KT37-8 | 12.0 | – | ||||||
| KT37-18 | 19.0 | – | ||||||
| KT37-19 | 19.0 | – | ||||||
| KT37-26 | 28.5 | – | ||||||
| KT37-40 | 24.5 | – | ||||||
| KT37-45 | 34.0 | – | ||||||
| KT37-52 | 26.0 | – | ||||||
| KT38-2 | 7.4 | .375/9.53 | .175/4.45 | .190/4.83 | 2.18 | .114 | .248 | |
| KT38-8 | 20.0 | – | ||||||
| KT38-18 | 36.0 | – | ||||||
| KT38-19 | 36.0 | – | ||||||
| KT38-26 | 49.0 | – | ||||||
| KT38-40 | 41.5 | |||||||
| KT38-45 | 65.0 | – | ||||||
| KT38-52 | 49.0 | – | ||||||
| KT40-26 | 36.0 | .400/10.2 | .205/5.21 | .163/4.14 | 2.41 | .093 | .223 | – |
| KT40-52 | 36.0 | – | ||||||
| KT44-2 | 5.2 | .440/11.2 | .229/5.82 | .159/4.04 | 2.68 | .099 | .266 | – |
| KT44-8 | 18.0 | – | ||||||
| KT44-14 | 6.2 | – | ||||||
| KT44-18 | 25.5 | – | ||||||
| KT44-19 | 25.5 | – | ||||||
| KT44-26 | 37.0 | – | ||||||
| KT44-40 | 31.0 | |||||||
| KT44-45 | 46.5 | – | ||||||
| KT44-52 | 35.0 | – | ||||||
| KT44-52C | 55.0 | .440/11.2 | .229/5.82 | .250/6.35 | 2.68 | .157 | .419 | – |
| KT44-52D | 70.0 | .440/11.2 | .229/5.82 | .338/8.59 | 2.68 | .212 | .567 | – |
| KT50-2 | 4.9 | .500/12.7 | .303/7.70 | .190/4.83 | 3.19 | .112 | .358 | – |
| KT50-6 | 4.0 | |||||||
| KT50-8 | 17.5 | – | ||||||
| KT50-14 | 5.9 | – | ||||||
| KT50-18 | 24.0 | – | ||||||
| KT50-19 | 24.0 | – | ||||||
| KT50-26 | 33.0 | |||||||
| KT50-38 | 37.5 | – | ||||||
| KT50-40 | 29.5 | – | ||||||
| KT50-45 | 44.0 | – | ||||||
| KT50-52 | 33.0 | |||||||
| KT50-8B | 23.0 | .500/12.7 | .303/7.70 | .250/6.35 | 3.19 | .148 | .471 | – |
| KT50-18B | 32.0 | – | ||||||
| KT50-19B | 32.0 | – | ||||||
| KT50-26B | 43.5 | |||||||
| KT50-38B | 49.5 | – | ||||||
| KT50-40B | 38.5 | – | ||||||
| KT50-45B | 58.0 | – | ||||||
| KT50-52B | 43.5 | – | ||||||
| KT50-8C | 28.3 | .500/12.7 | .303/7.70 | .335/8.51 | 3.19 | .200 | .637 | – |
| KT50-26C | 61.0 | – | ||||||
| KT50-26D | 72.0 | .500/12.7 | .303/7.70 | .375/9.53 | 3.19 | .223 | .711 | – |
| KT50-40D | 59.0 | – | ||||||
| KT50-52D | 66.0 | – | ||||||
| KT51-8C | 37.0 | .500/12.7 | .200/5.08 | .250/6.35 | 2.79 | .223 | .622 | – |
| KT51-18C | 55.0 | – | ||||||
| KT51-26C | 83.0 | – | ||||||
| KT51-40C | 67.0 | – | ||||||
| KT51-52C | 75.0 | – | ||||||
| KT57-45 | 67.0 | .573/14.6 | .273/6.93 | .196/4.98 | 3.38 | .178 | .601 | – |
| KT57-52 | 49.5 | – | ||||||
| KT57-45A | 88.0 | .573/14.6 | .273/6.93 | .263/6.68 | 3.38 | .239 | .805 | – |
| KT57-52A | 66.0 | – | ||||||
| KT60-2 | 6.5 | .600/15.2 | .336/8.53 | .234/5.94 | 3.74 | .187 | .699 | – |
| KT60-8 | 19.0 | – | ||||||
| KT60-14 | 8.3 | – | ||||||
| KT60-18 | 34.5 | – | ||||||
| KT60-19 | 34.5 | – | ||||||
| KT60-26 | 50.0 | |||||||
| KT60-40 | 41.5 | – | ||||||
| KT60-52 | 47.0 | – | ||||||
| KT60-26D | 97.0 | .600/15.2 | .336/8.53 | .470/11.9 | 3.74 | .374 | 1.400 | |
| KT60-52D | 94.0 | |||||||
| KT68-2 | 5.7 | .690/17.5 | .370/9.40 | .190/4.83 | 4.23 | .179 | .759 | |
| KT68-8 | 19.5 | – | ||||||
| KT68-14 | 7.0 | – | ||||||
| KT68-18 | 29.0 | – | ||||||
| KT68-19 | 29.0 | – | ||||||
| KT68-26 | 43.5 | |||||||
| KT68-38 | 45.0 | – | ||||||
| KT68-40 | 35.0 | – | ||||||
| KT68-45 | 53.0 | – | ||||||
| KT68-52 | 40.0 | |||||||
| KT68-2A | 7.0 | .690/17.5 | .370/9.40 | .250/6.35 | 4.23 | .242 | 1.03 | – |
| KT68-8A | 26.0 | – | ||||||
| KT68-14A | 9.5 | – | ||||||
| KT68-18A | 39.5 | – | ||||||
| KT68-19A | 39.5 | – | ||||||
| KT68-26A | 58.0 | |||||||
| KT68-38A | 61.0 | – | ||||||
| KT68-40A | 47.0 | – | ||||||
| KT68-45A | 71.0 | – | ||||||
| KT68-52A | 54.0 | |||||||
| KT68-2D | 11.4 | .690/17.5 | .370/9.40 | .375/9.53 | 4.23 | .358 | 1.52 | – |
| KT68-14D | 14.2 | – | ||||||
| KT68-26D | 87.0 | – | ||||||
| KT68-40D | 70.0 | – | ||||||
| KT68-52D | 80.0 | – | ||||||
| KT69-45 | 120.0 | .690/17.5 | .336/8.53 | .367/9.32 | 4.09 | .394 | 1.61 | – |
| KT72-2 | 12.8 | .720/18.3 | .280/7.11 | .260/6.60 | 4.01 | .349 | 1.40 | – |
| KT72-8 | 36.0 | – | ||||||
| KT72-18 | 60.0 | – | ||||||
| KT72-26 | 90.0 | |||||||
| KT72-40 | 71.0 | – | ||||||
| KT72-52 | 82.0 | |||||||
| KT80-2 | 5.5 | .795/20.2 | .495/12.6 | .250/6.35 | 5.14 | .231 | 1.19 | – |
| KT80-8 | 18.0 | – | ||||||
| KT80-14 | 7.4 | – | ||||||
| KT80-18 | 31.0 | – | ||||||
| KT80-19 | 31.0 | – | ||||||
| KT80-26 | 46.0 | – | ||||||
| KT80-38 | 48.0 | – | ||||||
| KT80-40 | 39.5 | – | ||||||
| KT80-45 | 56.0 | – | ||||||
| KT80-52 | 42.0 | |||||||
| KT80-8B | 29.5 | .795/20.2 | .495/12.6 | .375/9.53 | 5.14 | .347 | 1.78 | – |
| KT80-14B | 11.0 | – | ||||||
| KT80-18B | 46.5 | – | ||||||
| KT80-19B | 46.5 | – | ||||||
| KT80-26B | 71.0 | |||||||
| KT80-38B | 72.0 | – | ||||||
| KT80-40B | 59.0 | – | ||||||
| KT80-45B | 84.0 | – | ||||||
| KT80-52B | 63.0 | |||||||
| KT80-26D | 92.0 | .795/20.2 | .495/12.6 | .500/12.7 | 5.14 | .453 | 2.33 | – |
| KT80-40D | 79.0 | – | ||||||
| KT80-52D | 83.0 | – | ||||||
| KT90-8 | 30.0 | .900/22.9 | .550/14.0 | 0.375/9.53 | 5.78 | 0.395 | 2.28 | – |
| KT90-18 | 47.0 | – | ||||||
| KT90-19 | 47.0 | – | ||||||
| KT90-26 | 70.0 | – | ||||||
| KT90-38 | 73.0 | – | ||||||
| KT90-40 | 57.0 | – | ||||||
| KT90-45 | 85.0 | – | ||||||
| KT90-52 | 64.0 | – | ||||||
| KT94-2 | 8.4 | .942/23.9 | 560/14.2 | .312/7.92 | 5.97 | .362 | 2.16 | |
| KT94-8 | 25.0 | – | ||||||
| KT94-14 | 10.0 | – | ||||||
| KT94-18 | 42.0 | – | ||||||
| KT94-19 | 42.0 | – | ||||||
| KT94-26 | 60.0 | – | ||||||
| KT94-38 | 65.0 | – | ||||||
| KT94-40 | 49.0 | – | ||||||
| KT94-45 | 76.0 | – | ||||||
| KT94-52 | 57.0 | |||||||
| KT95-26B | 84.0 | .942/23.9 | .495/12.6 | .375/9.53 | 5.72 | .510 | 2.91 | – |
| KT95-52B | 84.0 | – | ||||||
| KT106-2 | 13.5 | 1.060/26.9 | .570/14.5 | .437/11.1 | 6.49 | .659 | .659 | – |
| KT106-8 | 45.0 | – | ||||||
| KT106-14 | 17.0 | – | ||||||
| KT106-18 | 70.0 | – | ||||||
| KT106-19 | 70.0 | – | ||||||
| KT106-26 | 93.0 | – | ||||||
| KT106-28 | 30.0 | – | ||||||
| KT106-30 | 30.0 | – | ||||||
| KT106-33 | 40.0 | – | ||||||
| KT106-34 | 40.0 | – | ||||||
| KT106-35 | 40.0 | – | ||||||
| KT106-38 | 108.0 | |||||||
| KT106-40 | 81.0 | – | ||||||
| KT106-45 | 125.0 | – | ||||||
| KT106-52 | 95.0 | |||||||
| KT106-18A | 49.0 | 1.060/26.9 | .570/14.5 | .312/7.92 | 6.49 | .461 | 3.00 | – |
| KT106-26A | 67.0 | – | ||||||
| KT106-40A | 58.0 | – | ||||||
| KT106-52A | 67.0 | – | ||||||
| KT106-18B | 91.0 | 1.060/26.9 | .570/14.5 | .575/14.6 | 6.49 | .858 | 5.57 | – |
| KT106-19B | 91.0 | – | ||||||
| KT106-26B | 124.0 | |||||||
| KT106-40B | 106.0 | – | ||||||
| KT106-52B | 124.0 | – | ||||||
| KT130-2 | 11.0 | 1.300/33.0 | .780/19.8 | .437/11.1 | 8.28 | .698 | 5.78 | |
| KT130-8 | 35.0 | – | ||||||
| KT130-14 | 14.0 | – | ||||||
| KT130-18 | 58.0 | – | ||||||
| KT130-19 | 58.0 | – | ||||||
| KT130-26 | 81.0 | 1.300/33.0 | .780/19.8 | .438/11.1 | 8.28 | .698 | 5.78 | |
| KT130-28 | 25.0 | – | ||||||
| KT130-30 | 25.0 | |||||||
| KT130-33 | 33.5 | – | ||||||
| KT130-34 | 33.5 | – | ||||||
| KT130-35 | 33.5 | – | ||||||
| KT130-38 | 90.0 | – | ||||||
| KT130-40 | 69.0 | – | ||||||
| KT130-45 | 105.0 | – | ||||||
| KT130-52 | 79.0 | |||||||
| KT130-26A | 41.0 | 1.300/33.0 | .780/19.8 | .225/5.72 | 8.28 | .361 | 2.99 | |
| KT130-45A | 53.0 | |||||||
| KT130-52A | 40.0 | |||||||
| KT131-8 | 52.5 | 1.300/33.0 | .640/16.3 | .437/11.1 | 7.72 | .885 | 6.84 | – |
| KT131-18 | 79.0 | – | ||||||
| KT131-19 | 79.0 | – | ||||||
| KT131-26 | 116.0 | |||||||
| KT131-33 | 46.5 | – | ||||||
| KT131-34 | 46.5 | – | ||||||
| KT131-35 | 46.5 | – | ||||||
| KT131-40 | 93.0 | – | ||||||
| KT131-52 | 108.0 | |||||||
| KT132-26 | 103.0 | 1.300/33.0 | .700/17.8 | .437/11.1 | 7.96 | .805 | 6.41 | |
| KT132-40 | 83.0 | – | ||||||
| KT132-52 | 95.0 | – | ||||||
| KT141-8 | 32.0 | 1.415/35.9 | .880/22.4 | .412/10.5 | 9.14 | .674 | 6.16 | |
| KT141-26 | 75.0 | |||||||
| KT141-40 | 60.0 | – | ||||||
| KT141-52 | 69.0 | – | ||||||
| KT150-18 | 65.0 | 1.510/38.4 | .845/21.5 | .437/11.1 | 9.38 | .887 | 8.31 | |
| KT150-26 | 96.0 | |||||||
| KT150-40 | 78.0 | – | ||||||
| KT150-52 | 89.0 | |||||||
| KT157-2 | 14.0 | 1.570/39.9 | .950/24.1 | .570/14.5 | 10.1 | 1.06 | 10.7 | – |
| KT157-8 | 42.0 | – | ||||||
| KT157-14 | 17.5 | – | ||||||
| KT157-18 | 73.0 | – | ||||||
| KT157-19 | 73.0 | – | ||||||
| KT157-26 | 100.0 | |||||||
| KT157-28 | 31.5 | – | ||||||
| KT157-30 | 31.5 | – | ||||||
| KT157-33 | 43.5 | – | ||||||
| KT157-34 | 43.5 | – | ||||||
| KT157-35 | 43.5 | – | ||||||
| KT157-38 | 112.0 | – | ||||||
| KT157-40 | 86.0 | |||||||
| KT157-45 | 130.0 | – | ||||||
| KT157-52 | 99.0 | |||||||
| KT175-2 | 15.0 | 1.750/44.5 | 1.070/27.2 | .650/16.5 | 11.2 | 1.34 | 15.0 | |
| KT175-8 | 48.0 | – | ||||||
| KT175-18 | 82.0 | – | ||||||
| KT175-26 | 105.0 | |||||||
| KT175-40 | 90.0 | – | ||||||
| KT175-52 | 105.0 | – | ||||||
| KT184-2 | 24.0 | 1.840/46.7 | .950/24.1 | .710/18.0 | 11.2 | 1.88 | 21.0 | – |
| KT184-8 | 72.0 | |||||||
| KT184-14 | 28.0 | – | ||||||
| KT184-18 | 116.0 | – | ||||||
| KT184-19 | 116.0 | – | ||||||
| KT184-26 | 169.0 | |||||||
| KT184-28 | 51.0 | – | ||||||
| KT184-30 | 51.0 | – | ||||||
| KT184-33 | 70.0 | |||||||
| KT184-34 | 70.0 | – | ||||||
| KT184-35 | 70.0 | – | ||||||
| KT184-40 | 143.0 | – | ||||||
| KT184-52 | 159.0 | |||||||
| KT200-2 | 12.0 | 2.000/50.8 | 1.250/31.8 | .550/14.0 | 13.0 | 1.27 | 16.5 | – |
| KT200-8 | 42.5 | – | ||||||
| KT200-18 | 67.0 | – | ||||||
| KT200-19 | 67.0 | – | ||||||
| KT200-26 | 92.0 | |||||||
| KT200-33 | 37.0 | – | ||||||
| KT200-34 | 37.0 | – | ||||||
| KT200-35 | 37.0 | – | ||||||
| KT200-40 | 79.0 | |||||||
| KT200-52 | 92.0 | |||||||
| KT200-2B | 21.8 | 2.000/50.8 | 1.250/31.8 | 1.000/25.4 | 13.0 | 2.32 | 30.00 | – |
| KT200-8B | 78.5 | – | ||||||
| KT200-18B | 120.0 | – | ||||||
| KT200-19B | 120.0 | – | ||||||
| KT200-26B | 160.0 | |||||||
| KT200-30B | 51.0 | |||||||
| KT200-35B | 74.0 | – | ||||||
| KT200-40B | 142.0 | – | ||||||
| KT200-52B | 155.0 | |||||||
| KT201-8 | 104.0 | 2.000/50.8 | .950/24.1 | .875/22.2 | 11.8 | 2.81 | 33.2 | – |
| KT201-18 | 164.0 | – | ||||||
| KT201-26 | 224.0 | |||||||
| KT201-40 | 194.0 | – | ||||||
| KT201-52 | 224.0 | – | ||||||
| KT224-26C | 155.0 | 2.250/57.2 | 1.250/31.8 | .750/19.1 | 14.0 | 2.31 | 32.2 | – |
| KT224-52C | 155.0 | – | ||||||
| KT225-2 | 12.0 | 2.250/57.2 | 1.405/35.7 | .550/14.0 | 14.6 | 1.42 | 20.7 | – |
| KT225-8 | 42.5 | – | ||||||
| KT225-18 | 67.0 | – | ||||||
| KT225-19 | 67.0 | – | ||||||
| KT225-26 | 98.0 | 2.250/57.2 | 1.405/35.7 | .550/14.0 | 14.6 | 1.42 | 20.7 | – |
| KT225-28 | 28.0 | – | ||||||
| KT225-30 | 28.0 | – | ||||||
| KT225-33 | 37.0 | – | ||||||
| KT225-34 | 37.0 | – | ||||||
| KT225-35 | 37.0 | – | ||||||
| KT225-40 | 78.0 | |||||||
| KT225-52 | 92.0 | – | ||||||
| KT225-2B | 21.5 | 2.250/57.2 | 1.405/35.7 | 1.000/25.4 | 14.6 | 2.59 | 37.8 | |
| KT225-14B | 28.0 | |||||||
| KT225-26B | 160.0 | |||||||
| KT225-34B | 67.0 | |||||||
| KT225-52B | 155.0 | |||||||
| KT249-26 | 203.0 | 2.500/63.5 | 1.405/35.7 | 1.000/25.4 | 15.6 | 3.36 | 52.3 | – |
| KT249-34 | 89.0 | – | ||||||
| KT249-52 | 203.0 | – | ||||||
| KT250-8 | 113.0 | 2.500/63.5 | 1.250/31.8 | 1.000/25.4 | 15.0 | 3.84 | 57.4 | – |
| KT250-14 | 43.0 | – | ||||||
| KT250-18 | 177.0 | |||||||
| KT250-19 | 177.0 | – | ||||||
| KT250-26 | 242.0 | |||||||
| KT250-30 | 71.0 | – | ||||||
| KT250-34 | 106.0 | – | ||||||
| KT250-40 | 194.0 | – | ||||||
| KT250-52 | 242.0 | |||||||
| KT260-18 | 128.0 | 2.670/67.9 | 1.600/40.7 | 1.000/25.4 | 17.1 | 3.45 | 59.0 | – |
| KT260-26 | 175.0 | – | ||||||
| KT260-28 | 51.0 | – | ||||||
| KT260-30 | 51.0 | – | ||||||
| KT260-33 | 76.5 | – | ||||||
| KT260-34 | 76.5 | – | ||||||
| KT260-35 | 76.5 | – | ||||||
| KT260-40 | 140.0 | – | ||||||
| KT260-52 | 175.0 | – | ||||||
| KT300-2 | 11.4 | 3.040/77.2 | 1.930/49.0 | .500/12.7 | 19.8 | 1.68 | 33.4 | – |
| KT300-8 | 37.0 | – | ||||||
| KT300-18 | 58.0 | – | ||||||
| KT300-19 | 58.0 | – | ||||||
| KT300-26 | 80.0 | |||||||
| KT300-28 | 23.0 | – | ||||||
| KT300-30 | 23.0 | – | ||||||
| KT300-33 | 34.5 | – | ||||||
| KT300-34 | 34.5 | – | ||||||
| KT300-35 | 34.5 | – | ||||||
| KT300-40 | 71.0 | – | ||||||
| KT300-52 | 80.0 | |||||||
| KT300-2D | 22.8 | 3.040/77.2 | 1.930/49.0 | 1.000/25.4 | 19.8 | 3.38 | 67.0 | – |
| KT300-14D | 28.0 | – | ||||||
| KT300-18D | 116.0 | – | ||||||
| KT300-19D | 116.0 | – | ||||||
| KT300-26D | 160.0 | |||||||
| KT300-28D | 46.0 | – | ||||||
| KT300-30D | 46.0 | |||||||
| KT300-33D | 69.0 | – | ||||||
| KT300-34D | 69.0 | – | ||||||
| KT300-35D | 69.0 | – | ||||||
| KT300-40D | 142.0 | – | ||||||
| KT300-52D | 160.0 | |||||||
| KT350-18 | 125.0 | 3.500/89.0 | 2.140/54.4 | 1.000/25.4 | 22.5 | 4.39 | 98.0 | – |
| KT350-26 | 171.0 | – | ||||||
| KT350-28 | 50.0 | – | ||||||
| KT350-30 | 50.0 | – | ||||||
| KT350-33 | 75.0 | – | ||||||
| KT350-34 | 75.0 | – | ||||||
| KT350-35 | 75.0 | – | ||||||
| KT350-40 | 137.0 | – | ||||||
| KT350-52 | 171.0 | – | ||||||
| KT350-55 | 58.0 | – | ||||||
| KT400-2 | 18.0 | 4.000/102 | 2.250/57.2 | .650/16.5 | 25.0 | 3.46 | 86.4 | |
| KT400-8 | 60.0 | |||||||
| KT400-18 | 96.0 | – | ||||||
| KT400-19 | 96.0 | – | ||||||
| KT400-26 | 131.0 | |||||||
| KT400-28 | 40.5 | – | ||||||
| KT400-30 | 40.5 | – | ||||||
| KT400-33 | 55.0 | – | ||||||
| KT400-34 | 55.0 | – | ||||||
| KT400-35 | 55.0 | – | ||||||
| KT400-40 | 115.0 | |||||||
| KT400-52 | 131.0 | |||||||
| KT400-26B | 205.0 | 4.000/102 | 2.250/57.2 | 1.000/25.4 | 25.0 | 5.35 | 133 | |
| KT400-2D | 36.0 | 4.000/102 | 2.250/57.2 | 1.300/33.0 | 25.0 | 6.85 | 171 | |
| KT400-14D | 45.5 | |||||||
| KT400-26D | 262.0 | |||||||
| KT400-28D | 81.0 | – | ||||||
| KT400-30D | 81.0 | – | ||||||
| KT400-33D | 110.0 | – | ||||||
| KT400-34D | 110.0 | – | ||||||
| KT400-35D | 110.0 | – | ||||||
| KT400-40D | 230.0 | |||||||
| KT520-2 | 20.0 | 5.200/132 | 3.080/78.2 | .800/20.3 | 33.1 | 5.24 | 173 | – |
| KT520-8 | 65.0 | – | ||||||
| KT520-26 | 149.0 | – | ||||||
| KT520-28 | 45.0 | – | ||||||
| KT520-30 | 45.0 | – | ||||||
| KT520-33 | 65.0 | – | ||||||
| KT520-34 | 65.0 | – | ||||||
| KT520-35 | 65.0 | – | ||||||
| KT520-40 | 119.0 | – | ||||||
| KT520-52 | 137.0 | |||||||
| KT520-28D | 90.0 | 5.200/132 | 3.080/78.2 | 1.600/40.6 | 33.1 | 10.5 | 347 | – |
| KT520-30D | 90.0 | |||||||
| KT520-33D | 130.0 | – | ||||||
| KT520-34D | 130.0 | |||||||
| KT520-35D | 130.0 | |||||||
| KT520-40D | 240.0 | |||||||
| KT650-2 | 58.0 | 6.500/165 | 3.500/88.9 | 2.000/50.8 | 39.9 | 18.4 | 734 | |
| KT650-8 | 200.0 | |||||||
| KT650-26 | 434.0 | – | ||||||
| KT650-28 | 127.0 | – | ||||||
| KT650-30 | 127.0 | – | ||||||
| KT650-33 | 191.0 | – | ||||||
| KT650-34 | 191.0 | |||||||
| KT650-35 | 191.0 | – | ||||||
| KT650-40 | 376.0 | – | ||||||
| KT650-52 | 405.0 | – |
Ferrita E Polvo de hierro (E cores)
| Micrometals | DM | AL | A | B | C | D | F | G | le | Ae | V | W | ||
| Part No. | Part No. | nH/N² | in/mm | in/mm | in/mm | in/mm | in/mm | in/mm | cm | cm² | cm³ | cm² | ||
| KE13-18 | E49-18 | DE49 | 29.0 | .500/12.7 | .437/11.1 | .125/3.18 | .312/7.93 | .125/3.18 | .375/9.53 | 2.86 | .101 | .288 | .252 | |
| KE13-26 | E49-26 | 38.0 | ||||||||||||
| KE13-52 | E49-52 | 38.0 | ||||||||||||
| KE13-8 | E49-8 | 20.5 | ||||||||||||
| KE16-26 | E65-26 | DE65 | 58.0 | .645/16.4 | .640/16.3 | .182/4.62 | .471/12.0 | .182/4.62 | .445/11.3 | 3.98 | .224 | .861 | .399 | |
| KE16-40 | E65-40 | 51.0 | ||||||||||||
| KE16-52 | E65-52 | 56.0 | ||||||||||||
| KE16-8 | E65-8 | 30.5 | ||||||||||||
| KE19-2 | E75-2 | DE75 | 14.5 | .750/19.1 | .635/16.1 | .187/4.75 | .455/11.6 | .187/4.75 | .562/14.3 | 4.20 | .226 | .936 | .551 | |
| KE19-26 | E75-26 | 64.0 | ||||||||||||
| KE19-40 | E75-40 | 55.0 | ||||||||||||
| KE19-52 | E75-52 | 59.0 | ||||||||||||
| KE19-8 | E75-8 | 33.5 | ||||||||||||
| KE20-26 | E79-26 | 49.0 | .793/20.1 | .884/22.5 | .140/3.56 | .634/16.1 | .250/6.35 | .546/13.9 | 5.24 | .225 | 1.18 | .605 | ||
| KE20-26A | E80-26 | DE80 | 73.0 | .795/20.2 | .784/19.9 | .230/5.84 | .550/14.0 | .230/5.84 | .575/14.6 | 4.84 | .333 | 1.63 | .613 | pdf pdf |
| KE20-52A | E80-52 | 73.0 | ||||||||||||
| KE20-8A | E80-8 | 38.0 | ||||||||||||
| KE25-8 | E99-8 | DE99 | 51.0 | 1.000/25.4 | 1.000/25.4 | .287/7.29 | .690/17.5 | .287/7.29 | .695/17.7 | 6.08 | .548 | 3.38 | .908 | |
| KE25-26 | E99-26 | 96.0 | ||||||||||||
| KE25-52 | E99-52 | 96.0 | ||||||||||||
| KE25-2A | E100-2 | DE100 | 21.0 | 1.000/25.4 | .750/19.1 | .250/6.35 | .500/12.7 | .250/6.35 | .750/19.1 | 5.08 | .403 | 2.05 | .806 | |
| KE25-8A | E100-8 | 48.0 | ||||||||||||
| KE25-18A | E100-18 | 65.0 | ||||||||||||
| KE25-26A | E100-26 | 92.0 | ||||||||||||
| KE25-40A | E100-40 | 81.0 | ||||||||||||
| KE25-52A | E100-52 | 85.0 | ||||||||||||
| KE26-2 | E101-2 | 53.0 | 1.020/25.9 | .750/19.1 | .555/14.1 | .350/8.89 | .250/6.35 | .765/19.4 | 3.93 | .895 | 2.36 | .581 | ||
| KE26-8 | E101-8 | 116.0 | ||||||||||||
| KE30-26 | E118-26 | DE118 | 90.0 | 1.185/30.1 | 1.185/30.1 | .278/7.06 | .782/19.9 | .278/7.06 | .782/19.9 | 7.14 | .498 | 4.60 | 1.27 | |
| KE30-40 | E118-40 | 80.0 | ||||||||||||
| KE30-52 | E118-52 | 90.0 | ||||||||||||
| KE32-26 | E125-26 | 134.0 | 1.255/31.8 | 1.215/30.8 | .378/9.60 | .835/21.2 | .378/9.60 | .885/22.5 | 7.45 | .922 | 6.82 | 1.37 | ||
| KE32-33 | E125-33 | 63.5 | ||||||||||||
| KE32-40 | E125-40 | 113.0 | ||||||||||||
| KE35-18 | E137-18 | DE137 | 100.0 | 1.375/34.9 | 1.145/29.1 | .375/9.53 | .770/19.6 | .375/9.53 | .1.000/25.4 | 7.40 | .907 | 6.72 | 1.55 | |
| KE35-2 | E137-2 | 32.0 | ||||||||||||
| KE35-26 | E137-26 | 134.0 | ||||||||||||
| KE35-40 | E137-40 | 113.0 | ||||||||||||
| KE35-52 | E137-52 | 131.0 | ||||||||||||
| KE35-8 | E137-8 | 67.0 | ||||||||||||
| KE37-18 | E145-18 | 112.0 | 1.455/37.0 | 1.370/34.8 | .425/10.8 | .950/24.1 | .425/10.8 | 1.035/26.3 | 8.50 | 1.17 | 9.89 | 1.84 | ||
| KE37-26 | E145-26 | 146.0 | ||||||||||||
| KE37-52 | E145-52 | 146.0 | ||||||||||||
| KE41-18 | E162-18 | DE162 | 149.0 | 1.625/41.3 | 1.342/34.1 | .500/12.7 | .842/21.4 | .500/12.7 | 1.125/28.6 | 8.41 | 1.61 | 13.6 | 1.70 | |
| KE41-26 | E162-26 | 210.0 | ||||||||||||
| KE41-40 | E162-40 | 175.0 | ||||||||||||
| KE41-52 | E162-52 | 199.0 | ||||||||||||
| KE41-8 | E162-8 | 105.0 | ||||||||||||
| KE43-18 | E168-18 | DE168 | 135.0 | 1.685/42.8 | 1.660/42.2 | .590/15.0 | 1.210/30.7 | .475/12.0 | 1.210/30.7 | 10.4 | 1.81 | 18.5 | 2.87 | |
| KE43-2 | E168-2 | 43.5 | ||||||||||||
| KE43-26 | E168-26 | 195.0 | ||||||||||||
| KE43-40 | E168-40 | 163.0 | ||||||||||||
| KE43-52 | E168-52 | 179.0 | ||||||||||||
| KE43-8 | E168-8 | 97.0 | ||||||||||||
| KE43-18A | E168-18A | DE168A | 170.0 | 1.685/42.8 | 1.660/42.2 | .787/20.0 | 1.210/30.7 | .475/12.0 | 1.210/30.7 | 10.4 | 2.41 | 24.6 | 2.87 | |
| KE43-26A | E168-26A | 232.0 | ||||||||||||
| KE43-2A | E168-2A | 55.0 | ||||||||||||
| KE43-40A | E168-40A | 196.0 | ||||||||||||
| KE43-52A | E168-52A | 230.0 | ||||||||||||
| KE43-8A | E168-8A | 116.0 | ||||||||||||
| KE47-18 | E187-18 | 213.0 | 1.865/47.4 | 1.552/39.4 | .620/15.7 | .952/24.2 | .620/15.7 | 1.250/31.8 | 9.53 | 2.48 | 23.3 | 1.93 | ||
| KE47-26 | E187-26 | 265.0 | ||||||||||||
| KE47-40 | E187-40 | 240.0 | ||||||||||||
| KE47-52 | E187-52 | 265.0 | ||||||||||||
| KE47-8 | E187-8 | 144.0 | ||||||||||||
| KE56-18 | E220-18 | DE220 | 196.0 | 2.210/56.1 | 2.180/55.4 | .820/20.8 | 1.510/38.3 | .680/17.3 | 1.520/38.6 | 13.2 | 3.60 | 47.7 | 4.09 | |
| KE56-2 | E220-2 | 69.0 | ||||||||||||
| KE56-26 | E220-26 | 275.0 | ||||||||||||
| KE56-30 | E220-30 | 107.0 | ||||||||||||
| KE56-34 | E220-34 | 136.0 | ||||||||||||
| KE56-40 | E220-40 | 240.0 | ||||||||||||
| KE56-52 | E220-52 | 262.0 | ||||||||||||
| KE56-8 | E220-8 | 143.0 | ||||||||||||
| KE57-18 | E225-18 | 240.0 | 2.240/56.9 | 1.875/47.6 | .745/18.9 | 1.140/29.0 | .745/18.9 | 1.500/38.1 | 11.5 | 3.58 | 40.8 | 2.78 | ||
| KE57-2 | E225-2 | 76.0 | ||||||||||||
| KE57-26 | E225-26 | 325.0 | ||||||||||||
| KE57-40 | E225-40 | 290.0 | ||||||||||||
| KE57-52 | E225-52 | 325.0 | ||||||||||||
| KE57-8 | E225-8 | 173.0 | ||||||||||||
| KE77-18 | E305-18 | DE305 | 222.0 | 3.051/77.5 | 3.051/77.5 | .933/23.7 | 2.118/53.8 | .933/23.7 | 2.118/53.8 | 18.5 | 5.62 | 104 | 8.10 | |
| KE77-2 | E305-2 | 75.0 | ||||||||||||
| KE77-26 | E305-26 | 287.0 | ||||||||||||
| KE77-30 | E305-30 | 124.0 | ||||||||||||
| KE77-34 | E305-34 | 150.0 | ||||||||||||
| KE77-40 | E305-40 | 255.0 | ||||||||||||
| KE77-52 | E305-52 | 287.0 | ||||||||||||
| KE77-8 | E305-8 | 156.0 | ||||||||||||
| KE77-18A | E305-18A | 280.0 | 3.051/77.5 | 3.051/77.5 | 1.244/31.6 | 2.118/53.8 | .933/23.7 | 2.118/53.8 | 18.5 | 7.49 | 139 | |||
| KE77-26A | E305-26A | 382.0 | ||||||||||||
| KE77-30A | E305-30A | 165.0 | ||||||||||||
| KE77-40A | E305-40A | 339.0 | ||||||||||||
| KE77-52A | E305-52A | 382.0 | ||||||||||||
| KE77-8A | E305-8A | 208.0 | ||||||||||||
| KE114-18H | E450-18H | 200.0 | 4.500/114 | 3.636/92.4 | .688/17.5 | 2.250/57.2 | 1.375/34.9 | 3.120/79.3 | 22.9 | 6.1 | 140 | 12.7 | ||
| KE114-52H | E450-52H | 270.0 | ||||||||||||
| KE114-8H | E450-8H | 140.0 | ||||||||||||
| KE114-18 | E450-18 | DE405 | 400.0 | 4.500/114 | 3.636/92.4 | 1.375/34.9 | 2.250/57.2 | 1.375/34.9 | 3.120/79.3 | 22.9 | 12.2 | 280 | 12.7 | |
| KE114-2 | E450-2 | 132.0 | ||||||||||||
| KE114-26 | E450-26 | 540.0 | ||||||||||||
| KE114-30 | E450-30 | 235.0 | ||||||||||||
| KE114-34 | E450-34 | 300.0 | ||||||||||||
| KE114-40 | E450-40 | 480.0 | ||||||||||||
| KE114-52 | E450-52 | 500.0 | ||||||||||||
| KE114-8 | E450-8 | 260.0 | ||||||||||||
| KE155-2 | E49-8 | 20.5 | 6.102/155 | 6.102/155 | 1.866/47.4 | 4.236/108 | 1.866/47.4 | 4.236/108 | 37.0 | 22.5 | 832 | 32.4 | ||
| KE155-26 | E610-2 | 163.0 | ||||||||||||
| KE155-34 | E610-26 | 588.0 |
U Cores
| AL | A | B | C | E | F | G | Le | Ae | V | |
| Part No. | nH/N² | in/mm | in/mm | in/mm | in/mm | in/mm | in/mm | cm | cm² | cm³ |
| KU350-2 | 59.0 | 3.50/88.9 | 5.75/146 | 1.00/25.4 | 3.25/82.6 | 1.00/25.4 | 1.50/38.1 | 35.6 | 6.45 | 250 |
| KU350-40 | 235.5 | |||||||||
| KU61-26 | 71.0 | 0.61/15.5 | 0.90/22.9 | 0.25/6.35 | 0.51/13.0 | 0.19/4.95 | 0.21/5.33 | 5.66 | .315 | 1.81 |
| KU80-26 | 71.0 | |||||||||
| KU80-40 | 64.0 | |||||||||
| KU80-52 | 70.0 | |||||||||
| KU80-8 | 42.4 | 0.80/20.3 | 1.25/31.8 | 0.25/6.35 | 0.75/19.1 | 0.25/6.35 | 0.30/7.62 | 7.87 | .403 | 3.18 |
KI Cores
| AL | OD1 | OD2 | ID | T | L | Window | |
| Part No. | nH/N² | mm | mm | mm | mm | mm | cm² |
| KI36.1*23.8*12.7 | 85 | 36.10 | 12.70 | 4.37 | 3.96 | 23.80 | 1.84 |
| KI36.1*33.3*12.7 | 60 | 36.10 | 12.70 | 4.37 | 3.96 | 33.30 | 2.95 |
| KI46.9*31.8*15.9 | 100 | 46.90 | 15.90 | 5.56 | 4.75 | 31.80 | 3.43 |
| KI46.9*41.3*15.9 | 80 | 46.90 | 15.90 | 5.56 | 4.75 | 41.30 | 4.90 |
| KI63.5*34.9*19.1 | 130 | 63.50 | 19.10 | 6.60 | 4.75 | 34.90 | 5.66 |
| KI63.5*47.6*19.1 | 95 | 63.50 | 19.10 | 6.60 | 4.75 | 47.60 | 8.49 |
KP Cores
| AL | OD | L | |
| Part No. | nH/N² | in/mm | in/mm |
| KP12.7*25.4 | 30.0 | .500/12.7 | 1.000/25.4 |
| KP12.7*31.8 | 34.5 | .500/12.7 | 1.250/31.8 |
| KP12.7*38.1 | 33.0 | .500/12.7 | 1.500/38.1 |
| KP12.7*44.5 | 32.0 | .500/12.7 | 1.750/44.5 |
| KP12.7*50.8 | 31.0 | .500/12.7 | 2.000/50.8 |
| KP15.9*31.8 | 37.5 | .625/15.9 | 1.250/31.8 |
| KP15.9*38.1 | 41.5 | .625/15.9 | 1.500/38.1 |
| KP19.1*38.1 | 45.0 | .750/19.1 | 1.500/38.1 |
| KP19.1*60.3 | 49.5 | .750/19.1 | 2.375/60.3 |
| KP25.4*50.8 | 80.0 | 1.000/25.4 | 2.000/50.8 |
| KP3.45*19.7 | 7.6 | .136/3.45 | .775/19.7 |
| KP4.83*19.1 | 12.5 | .190/4.83 | .750/19.1 |
| KP6.35*19.1 | 16.0 | .250/6.35 | .750/19.1 |
| KP6.35*25.4 | 16.0 | .250/6.35 | 1.000/25.4 |
| KP6.48*31.8 | 15.0 | .255/6.48 | 1.250/31.8 |
| KP6.48*38.1 | 14.5 | .255/6.48 | 1.500/38.1 |
| KP7.95*25.4 | 20.0 | .313/7.95 | 1.000/25.4 |
| KP7.95*31.8 | 20.0 | .313/7.95 | 1.250/31.8 |
| KP7.95*47.6 | 18.0 | .313/7.95 | 1.875/47.6 |
| KP9.53*25.4 | 25.2 | .375/9.53 | 1.000/25.4 |
| KP9.53*31.8 | 26.5 | .375/9.53 | 1.250/31.8 |
| KP9.53*38.1 | 25.0 | .375/9.53 | 1.500/38.1 |
| KP9.53*44.5 | 22.5 | .375/9.53 | 1.750/44.5 |
BUS BAR
| AL | A | B | L | D | E | Le | Ae | V | |
| Part No. | nH/N² | in/mm | in/mm | in/mm | in/mm | in/mm | cm | cm² | cm³ |
| KHS300-26 | 147 | ||||||||
| KHS300-26A | 179 | ||||||||
| KHS300-26B | 208 | ||||||||
| KHS300-26C | 232 | ||||||||
| KHS300-52 | 147 | ||||||||
| KHS300-52A | 179 | ||||||||
| KHS300-52B | 208 | ||||||||
| KHS300-52C | 232 | ||||||||
| KHS300-8 | 68 | 1.02/25.9 | 0.65/16.5 | .050/12.7 | 0.52/13.2 | 0.14/3.56 | 5.92 | .806 | 4.61 |
| KHS300-8A | 83 | 1.02/25.9 | 0.65/16.5 | 0.63/15.9 | 0.52/13.2 | 0.14/3.56 | 5.92 | 1.01 | 5.77 |
| KHS300-8B | 95 | 1.02/25.9 | 0.65/16.5 | 0.75/19.1 | 0.52/13.2 | 0.14/3.56 | 5.92 | 1.21 | 6.92 |
| KHS300-8C | 107 | 1.02/25.9 | 0.65/16.5 | 0.87/22.2 | 0.52/13.2 | 0.14/3.56 | 5.92 | 1.41 | 8.06 |
| KHS400-26 | 221 | 1.50/38.1 | 0.96/24.4 | 0.75/19.1 | 0.76/19.4 | 0.21/5.21 | 8.71 | 1.78 | 15.1 |
| KHS400-26A | 286 | 1.00/25.4 | 2.37 | 20.1 | |||||
| KHS400-26B | 335 | 1.25/31.8 | 2.96 | 25.2 | |||||
| KHS400-26C | 371 | 1.50/38.1 | 3.56 | 30.2 |
KH CORES (TUBO)
| Micrometals | OD | ID | L | |
| Part No. | Part No. | in/mm | in/mm | in/mm |
| KH12.7-40 | H811-1140 | .500/12.7 | .172/4.37 | .688/17.5 |
| KH12.7-40A | H817-1140 | .500/12.7 | .172/4.37 | 1.064/27.0 |
| KH12.7-40B | H822-1140 | .500/12.7 | .172/4.37 | 1.375/34.9 |
| KH15.9-40 | H1014-1040 | .500/12.7 | .172/4.37 | 1.375/34.9 |
| KH15.9-40A | H1015-1040 | .625/15.9 | .219/5.56 | .955/24.3 |
| KH15.9-40B | H1020-1040 | .625/15.9 | .219/5.56 | 1.250/31.8 |
| KH15.9-40C | H1021-1040 | .625/15.9 | .219/5.56 | 1.330/33.8 |
| KH19.1-33A | H1224-1033 | .750/19.1 | .260/6.60 | 1.500/38.1 |
| KH19.1-40 | H1217-1040 | .750/19.1 | .260/6.60 | 1.080/27.4 |
| KH19.1-40B | H1225-1040 | .750/19.1 | .260/6.60 | 1.580/40.1 |
| KH25.4-40 | H1616-1040 | 1.000/25.4 | .250/6.35 | 1.000/25.4 |
| KH7.95-26 | H512-1026 | .312/7.95 | .137/3.48 | .750/19.1 |